In our agricultural irrigation, the length of irrigation is not only the length of PVC lay flat hose, especially agricultural irrigation, hundreds of meters or even more. This requires PVC lay flat hose joints to connect with PVC lay flat hose operation. Selecting good agricultural PVC lay flat hose joints is also the guarantee of fast transportation and drainage operation.
According to materials, PVC lay flat hose joints can be divided into plastic joints, aluminum joints, casting joints, die-casting joints and tank joints. Size ranges from 1.5 inches to 8 inches. The pressure of plastic joint is low and can be used for ordinary irrigation. The pressure of hose joint increases in turn. The joints are divided into upper and lower parts and contain rubber pads. When connecting, hold the PVC lay flat hose interface with one hand, the protruding part of the water pipe interface is inserted into the concave end of one end, and the wrist rotates clockwise to clamp the interface. Fixed to the groove and connected the hose joints at both ends with clamps.
- Aluminum alloy joints can be equipped with high-pressure PVC lay flat hose. Water hose joints are generally support clamps. Purchase of matching pressure joints is not easy to leak, making irrigation more labor-saving。