Fire hose is produced by pvc lay flat hose machine. Next describes how to maintain fire pvc lay flat hose.
1. The connection between the hoses, fire pvc lay flat hose when put on the hose interface, it should be cushioned with a layer of soft items to play a protective role, and then tied with iron wire.
Second, pvc lay flat hose in use. The use of the water pump closer he place, the water after the water to prevent twisting or sudden bending, and should prevent pvc lay flat hose interface collision damage.
Third, pvc lay flat hose laying. When pvc lay flat hose is laid, avoid sharp objects and various oils. When lay water belts vertly, use water hose hooks and pvc lay flat hoses through traffic routes. When the bridge passes through the railway, the water belt should pass under the track to prevent the water belt from being broken by the wheel and stop water supply.
Fourth, prevent icing. During the severe winter season, when the supply of water needs to be suspended on the fire, in order to prevent the water belt from freezing, the water pump needs to run slowly to maintain a small amount of water.
Fifth, pvc lay flat hose cleaning, pvc lay flat hose after use, to clean, the hose to send foam, in order to remove the oil on pvc lay flat hose, wash with warm water or soap, on the frozen pvc lay flat hose The first thing to use is to melt, then wash and dry, and pvc flat hose should not be stored in a roll.