Cautions in the Use of PVC Layer Flat Hose

When the manufacturer of PVC lay flat hose wears the PVC lay flat hose interface, it must be covered with soft protective material and then fixed with galvanized wire or hose clamp.

Use. When using fire hose, high pressure resistant PVC lay flat hose should be placed near the pump. After water injection, the pipe should be prevented from twisting or sudden bending, and the collision and damage of PVC lay flat hose interface should be prevented.

Layout. When laying PVC lay flat hose, avoid using sharp objects and various oils. When placing the PVC lay flat hose vertically above, use the PVC lay flat hose hook. When PVC lay flat hose is laid through traffic lanes, PVC lay flat hose is placed on it.

When the bridge passes through the railway, the PVC lay flat hose should pass under the track to prevent the PVC lay flat hose from being crushed by the wheel and intermittently supplying water.

Prevent ice. In severe winter, when water supply is suspended on fire, in order to prevent the freezing of PVC lay flat hose, the pump needs to run slowly and keep a small amount of water.

After cleaning, PVC lay flat hose should be cleaned after use. The PVC lay flat hose used to transport foams must be carefully scrubbed to protect the rubber layer. In order to clean the grease on PVC lay flat hose, it can be cleaned by warm water or soap,

Families should first melt it with frozen PVC lay flat hose and then clean it up.