What if the PVC lay flat hose is damaged? Try the following tips!

How should PVC lay flat hose be repaired after scratch and wear?
PVC lay flat hose is a water-saving irrigation tool widely used in agricultural production activities. It has the characteristics of water-saving, high efficiency and convenient use, and is conducive to promoting agriculture to achieve high yield and income. However, in the process of practical application, due to improper operation and improper storage methods, PVC lay flat hose will inevitably be damaged or vulnerable. It’s a pity to throw away the PVC lay flat hose just because of a small hole. It wastes water resources and prevents the work from proceeding smoothly.
First, we can cut a part of the PVC lay flat hose from the old PVC lay flat hose or the broken PVC lay flat hose. The area of the cut PVC lay flat hose is larger than that of the broken hole. The electric soldering iron is slowly adhered to it, and then it can be used when it is completely dry.
Second, PVC lay flat hose can also be pasted with better quality glue.
Thirdly, if the leaking place of PVC lay flat hose is the joint, then it is necessary to cut off the joint, re-tie it, or cut a small section of the old PVC lay flat hose to cover the leaking place.
In addition, the repairing effect of waste tire inner tube is also very good. Specific operation: Cut several sections of waste tire inner tube, prepare 1.5 liter plastic bottle, cut the bottom, and use it to put tire inner tube  PVC lay flat hose. The cut plastic bottle is sheathed on the PVC lay flat hose interface, and then the plastic bottle on the interface is passed through the 15 cm to 20 cm motorcycle tire inner tube intercepted in front, and the plastic bottle is passed through the intercepted motorcycle tire inner tube needed for leak repair in turn. When the jacket is worn, some detergent can be applied on the bottle mouth and the outer wall to lubricate the jacket and facilitate the jacket to be worn. Finally, the repair of PVC lay flat hose can be completed by moving the inner tube of motorcycle tire to the proper part of PVC lay flat hose.