PVC Lay Flat Hose is a basic plastic product widely used in many industries, such as agriculture and greening construction. It can facilitate the basic daily activities of consumers. In the process of basic use of products, we should pay attention to some problems. The following is a simple understanding and understanding with Xiaobian of Weifang Goldsione Plastic Co., Ltd.
1, PVC Lay Flat Hose cleaning problem, in the use of the process, we must pay attention to the necessary cleaning, for the transport process of foam, need thorough cleaning, to maintain the adhesive layer purposes. At the same time, in order to remove the grease in the use of PVC Lay Flat Hose, it is necessary to wash it thoroughly with warm water or senna. If there is a freezing problem, the first thing is to deice it and then roll it up after drying.
2. In the process of laying PVC Lay Flat Hose, it is necessary to avoid contact with sharpened objects and various oil substances, and take necessary protective measures to avoid the possibility of crushing PVC Lay Flat Hose.
3. The basic use of PVC Lay Flat Hose, in the process of use, need to ensure that the water source is sufficient, after filling water can not appear bending problem, for severe winter season, in order to avoid icing water belt, water pumps need slow operation, adhere to a smaller amount of water.
Through the brief introduction above, you should have a simple understanding and understanding of the use of PVC Lay Flat Hose. Later, you will continue to organize and share more product information. Welcome to continue to pay attention.