How to Unroll & Roll PVC Lay Flat Hose？

PVC lay flat hose is widely used in many fields, such as engineering water transportation and drainage, agricultural irrigation, flood control and drainage, but many people don’t know enough about lay flat hose, and they are troubled in many aspects, such as the choice of use. The following is the correct method of rolling lay flat hose arranged for you, hoping to help you.

Step 1: Pick Up Hose
Step 2: Grab Hose Male Coupler Facing Forward
Step 3: Two Fingers Under First Lay of Coupler
Step 4: In a Swinging Motion With Hose (ring Finger and Little Finger Holding Second Lay
Step 5: Swing in a Bowling Motion
Step 6: Release Little Finger and Ring Finger
Step 7: If Hose Doesn’t Unroll Completely, Unroll Hose and Make Sure It Is Lying Flat
Step 8: To Correctly Roll an Inservice Hose Starting With the Male Coupling Fold Over Top of Hose and Continue Rolling Motion
Step 9: After Rolling Hose Lay Hose on Side
Step 10: Stepping on Hose Roll Make Sure Hose Is Flat
Step 11: If Hose Is Out of Service
Step 12: Unroll Hose
Step 13: Make Sure Hose Is Completely Flat
Step 14: Roll Hose With the Female Coupling on the Inside
Step 15: Lay Hose on Side
Step 16: Stand on Hose Making Sure Hose Is Flat
Step 17: When Taking a Hose Out of Service and Rolling Backwards You Must Document Hose Number That Was Taken Out of Service
Step 18: Then Replace the Out of Service Hose With a Functioning in Service Hose
Step 19: If You Are Interested in Learning How to Roll Hose Please Contact Your Local Fire Department
Step 20: Maybe I Can Teach You How to Roll Hose