PVC lay flat hose is a kind of water-saving irrigation tool widely used in agricultural production activities. It has the characteristics of water-saving, high efficiency and convenient use, which is conducive to promote the realization of high-yield and income increase in agriculture. However, in the process of practical application, due to improper operation and improper storage methods, PVC lay flat hose inevitably appears damage or loophole. It’s a pity to throw away PVC lay flat house just because of a small hole. It wastes water resources and hinders the smooth progress of the work.
First, we can cut part of the PVC lay flat hose from the old PVC lay flat hose or the broken PVC lay flat hose. The cut PVC lay flat hose area is larger than the broken hole area, and it can be used after it is completely dry. Second, it can also be pasted with better quality glue. Third, if there is water leakage The joint is the place where the joint is located, so it is necessary to cut off the joint, bind it again, or cut a small section of old PVC lay flat hose, and cover it in the place where the water leaks;
In addition, the repair effect of waste tire inner tube is also very good. Specific operation: cut several sections of waste tire inner tube, prepare a 1.5L plastic bottle, cut the bottom, and use it to cover the inner tube on PVC lay flat hose. Put the cut plastic bottle on the PVC lay flat hose interface, and then put the plastic bottle on the interface through the 15cm ~ 20cm motorcycle tire inner tube cut in front, and then put the plastic bottle through the motorcycle tire inner tube cut in order to repair the leakage. When putting on the sleeve, some detergent can be applied at the bottle mouth and the outer wall of the bottle to play a lubricating role, which is convenient for putting on the sleeve. Finally, the repair of PVC lay flat hose can be completed by moving the inner tube of motorcycle tire to the proper position of PVC lay flat hose.