Flood control PVC Lay Flat Hose should pay attention to the following points when using:
1. Flood control PVC Lay Flat Hose is mainly made of high-strength polyester filament and high-quality PVC. After one-time moulding, it has high pressure resistance, wear resistance, smooth coating resistance, acid resistance, alkali resistance and pressure resistance. Generally, it can be used for a long time as it is not bad and leaks water.
2. When laying PVC Lay Flat Hose for flood control, sudden twists and turns should be avoided to prevent the ability of reducing water pressure, and torsion should also be avoided to prevent PVC Lay Flat Hose from turning after water filling and to release the inner-buckled PVC Lay Flat Hose interface.
3. After using the PVC Lay Flat Hose for flood control, it should be cleaned and lined with PVC Lay Flat Hose for hanging and drying, and then stored in a cool and dry place.
4. If a small opening is found in the use of PVC Lay Flat Hose, wrap it well with PVC Lay Flat Hose and weave or glue it as soon as possible afterwards. When obvious damage occurs, it should be replaced immediately.
5. The use of PVC Lay Flat Hose for flood control should abide by the quality standard of PVC Lay Flat Hose itself, and try to avoid the work of PVC Lay Flat Hose under high pressure beyond its own pressure range.
6. Flood control PVC Lay Flat Hose should be kept away from direct sunshine, acid and alkali etc.