Analysis of Blasting Pressure Testing Method for PVC Lay Flat Hose

PVC Lay Flat Hose has a good adaptability to the pressure environment, and can cope with the pressure from outside and the product working inside. Therefore, in the production of products, blasting pressure test is needed for products. Only products meeting the requirements of production activities can be used in actual production activities. Today, I will introduce how to carry out the blasting pressure test of PVC Lay Flat Hose. Here is to understand.
1. The Basic test method of the direct blasting pressure of PVC Lay Flat Hose is to raise the pressure to the product rating of the direct blasting pressure of PVC Lay Flat Hose and keep it for 5 seconds, so as to ensure that there will be no cracking problem of the test sample.
2. After the actual measurement of water seepage, the test sample is bent to ensure that a flange is at the outermost side of the arc, and the pressure is uniformly raised to the prescribed pressure range of the PVC Lay Flat Hose buckling blasting, so that there is no fracture problem.
3. According to the theory of broken burst pressure of PVC Lay Flat Hose, the test sample is folded from the middle after the water seepage is removed, so that the two ends of PVC Lay Flat Hose are aligned and fixed, the pressure is raised evenly, and the test sample is kept unbroken for 5 seconds.
Above are the explanations on the burst pressure test of PVC Lay Flat Hose, which are arranged and shared by Xiaobian. If you want to know more about the products, you are welcome to call Weifang Goldsione Plastic Products Co., Ltd. for consultation.